)
During the Ocata release, OpenStack DNS-as-a-Service (Designate) support was implemented in the Kolla project.
This post will guide you through a basic deployment and tests of Designate.
Install required dependencies and tools for kolla-ansible and Designate.
# yum install -y epel-release
# yum install -y python-pip python-devel libffi-devel gcc openssl-devel ansible ntp wget bind-utils
# pip install -U pip
Install Docker and downgrade to 1.12.6. At the time of writing this post, libvirt had issues connecting to D-Bus due to SElinux issues with Docker 1.13.
# curl -sSL https://get.docker.io | bash
# yum downgrade docker-engine-1.12.6 docker-engine-selinux-1.12.6
# yum install -y python-docker-pyConfigure Docker daemon to allow insecure-registry (use the IP where your remote registry will be located).
# mkdir -p /etc/systemd/system/docker.service.d
# tee /etc/systemd/system/docker.service.d/kolla.conf <<-'EOF'
[Service]
ExecStart=
ExecStart=/usr/bin/dockerd --insecure-registry 172.28.128.3:4000
MountFlags=shared
EOFReload the systemd daemons and start, stop, disable and enable the following services:
# systemctl daemon-reload
# systemctl stop libvirtd
# systemctl disable libvirtd
# systemctl enable ntpd docker
# systemctl start ntpd dockerDownload Ocata registry created in tarballs.openstack.org.
Create a Kolla registry from the downloaded tarball.
# wget https://tarballs.openstack.org/kolla/images/centos-binary-registry-ocata.tar.gz
# mkdir /opt/kolla_registry
# sudo tar xzf centos-binary-registry-ocata.tar.gz -C /opt/kolla_registry
# docker run -d -p 4000:5000 --restart=always -v /opt/kolla_registry/:/var/lib/registry --name registry registry:2Install kolla-ansible.
# pip install kolla-ansible
# cp -r /usr/share/kolla-ansible/etc_examples/kolla /etc/kolla/
# cp /usr/share/kolla-ansible/ansible/inventory/* .Configure kolla/globals.yml configuration file with the following content.
Change values when necessary (IP addresses, interface names).
This is a sample minimal configuration:
# vi /etc/kolla/globals.yml
---
kolla_internal_vip_address: "172.28.128.10"
kolla_base_distro: "centos"
kolla_install_type: "binary"
docker_registry: "172.28.128.3:4000"
docker_namespace: "lokolla"
network_interface: "enp0s8"
neutron_external_interface: "enp0s9"Configure designate options in globals.yml.
dns_interface must be network reachable from Nova instances if internal DNS resolution is needed.
enable_designate: "yes"
dns_interface: "enp0s8"
designate_backend: "bind9"
designate_ns_record: "sample.openstack.org"Configure inventory, add the nodes in their respective groups.
# vi ~/multinodeGenerate passwords.
# kolla-genpwdEnsure the environment is ready to deploy with prechecks.
Until prechecks does not succeed do not start deployment.
Fix what is necessary.
# kolla-ansible prechecks -i ~/multinodePull Docker images on the servers, this can be skipped because will be made in deploy step, but doing it first will ensure all the nodes have the images you need and will minimize the deployment time.
# kolla-ansible pull -i ~/multinodeDeploy kolla-ansible and do a woot for Kolla ?
# kolla-ansible deploy -i ~/multinodeCreate credentials file and source it.
# kolla-ansible post-deploy -i ~/multinode
# source /etc/kolla/admin-openrc.shCheck that all containers are running and none of them are restarting or exiting.
# docker ps -a --filter status=exited --filter status=restarting
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMESInstall required python clients
# pip install python-openstackclient python-designateclient python-neutronclientExecute a base OpenStack configuration (public and internal networks, cirros image).
Do no execute this script if custom networks are going to be used.
# sh /usr/share/kolla-ansible/init-runonceCreate a sample Designate zone.
# openstack zone create --email [email protected] sample.openstack.org.
+----------------+--------------------------------------+
| Field | Value |
+----------------+--------------------------------------+
| action | CREATE |
| attributes | |
| created_at | 2017-02-22T13:14:39.000000 |
| description | None |
| email | [email protected] |
| id | 4a44b0c9-bd07-4f5c-8908-523f453f269d |
| masters | |
| name | sample.openstack.org. |
| pool_id | 85d18aec-453e-45ae-9eb3-748841a1da12 |
| project_id | 937d49af6cfe4ef080a79f9a833d7c7d |
| serial | 1487769279 |
| status | PENDING |
| transferred_at | None |
| ttl | 3600 |
| type | PRIMARY |
| updated_at | None |
| version | 1 |
+----------------+--------------------------------------+Configure designate-sink to make use of the previously created zone, sink will need zone_id to automatically create neutron and nova records into Designate.
# mkdir -p /etc/kolla/config/designate/designate-sink/
# vi /etc/kolla/config/designate/designate-sink.conf
[handler:nova_fixed]
zone_id = 4a44b0c9-bd07-4f5c-8908-523f453f269d
[handler:neutron_floatingip]
zone_id = 4a44b0c9-bd07-4f5c-8908-523f453f269dAfter configure designate-sink.conf, reconfigure Designate to make use of this configuration.
# kolla-ansible reconfigure -i ~/multinode --tags designateList networks.
# neutron net-list
+--------------------------------------+----------+----------------------------------+--------------------------------------------------+
| id | name | tenant_id | subnets |
+--------------------------------------+----------+----------------------------------+--------------------------------------------------+
| 3b56c605-5a01-45be-9ed6-e4c3285e4366 | demo-net | 937d49af6cfe4ef080a79f9a833d7c7d | 7f28f050-77b2-426e-b963-35b682077993 10.0.0.0/24 |
| 6954d495-fb8c-4b0b-98a9-9672a7f65b7c | public1 | 937d49af6cfe4ef080a79f9a833d7c7d | 9bd9feca-40a7-4e82-b912-e51b726ad746 10.0.2.0/24 |
+--------------------------------------+----------+----------------------------------+--------------------------------------------------+Update the network with a dns_domain.
# neutron net-update 3b56c605-5a01-45be-9ed6-e4c3285e4366 --dns_domain sample.openstack.org.
Updated network: 3b56c605-5a01-45be-9ed6-e4c3285e4366Ensure dns_domain is properly applied.
# neutron net-show 3b56c605-5a01-45be-9ed6-e4c3285e4366
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | |
| availability_zones | nova |
| created_at | 2017-02-22T13:13:06Z |
| description | |
| dns_domain | sample.openstack.org. |
| id | 3b56c605-5a01-45be-9ed6-e4c3285e4366 |
| ipv4_address_scope | |
| ipv6_address_scope | |
| mtu | 1450 |
| name | demo-net |
| port_security_enabled | True |
| project_id | 937d49af6cfe4ef080a79f9a833d7c7d |
| provider:network_type | vxlan |
| provider:physical_network | |
| provider:segmentation_id | 27 |
| revision_number | 6 |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | 7f28f050-77b2-426e-b963-35b682077993 |
| tags | |
| tenant_id | 937d49af6cfe4ef080a79f9a833d7c7d |
| updated_at | 2017-02-22T13:25:16Z |
+---------------------------+--------------------------------------+Create a new instance in the previously updated network.
# openstack server create \
--image cirros \
--flavor m1.tiny \
--key-name mykey \
--nic net-id=3b56c605-5a01-45be-9ed6-e4c3285e4366 \
demo1Once the instance is “ACTIVE”, check the IP associated.
# openstack server list
+--------------------------------------+-------+--------+-------------------+------------+
| ID | Name | Status | Networks | Image Name |
+--------------------------------------+-------+--------+-------------------+------------+
| d483e4ee-58c2-4e1e-9384-85174630428e | demo1 | ACTIVE | demo-net=10.0.0.3 | cirros |
+--------------------------------------+-------+--------+-------------------+------------+List records in the designate-zone.
As you can see there is a record in designate associated with the instance IP:
# openstack recordset list sample.openstack.org.
+--------------------------------------+----------------------------------+------+-------------------------------------------+--------+--------+
| id | name | type | records | status | action |
+--------------------------------------+----------------------------------+------+-------------------------------------------+--------+--------+
| 4f70531e-c325-4ffd-a8d3-8172bd5163b8 | sample.openstack.org. | SOA | sample.openstack.org. | ACTIVE | NONE |
| | | | admin.sample.openstack.org. 1487770304 | | |
| | | | 3586 600 86400 3600 | | |
| a9a09c5f-ccf1-4b52-8400-f36e8faa9549 | sample.openstack.org. | NS | sample.openstack.org. | ACTIVE | NONE |
| aa6cd25d-186e-425b-9153-699d8b0811de | 10-0-0-3.sample.openstack.org. | A | 10.0.0.3 | ACTIVE | NONE |
| 713650a5-a45e-470b-9539-74e110b15115 | demo1.None.sample.openstack.org. | A | 10.0.0.3 | ACTIVE | NONE |
| 6506e6f6-f535-45eb-9bfb-4ac1f16c5c9b | demo1.sample.openstack.org. | A | 10.0.0.3 | ACTIVE | NONE |
+--------------------------------------+----------------------------------+------+-------------------------------------------+--------+--------+Validate that designate resolves the DNS record.
You can use Designate mDNS service or directly to bind9 servers to validate the test.
# dig +short -p 5354 @172.28.128.3 demo1.sample.openstack.org. A
10.0.0.3
# dig +short -p 53 @172.28.128.3 demo1.sample.openstack.org. A
10.0.0.3If you find any issue with designate in kolla-ansible or kolla, please fill a bug https://bugs.launchpad.net/kolla-ansible/+filebug
Regards,
Eduardo Gonzalez
This post first appeared on Eduardo Gonzalez’s blog. Superuser is always interested in community content, email: editorATsuperuser.org.
- Deploying OpenStack Designate with Kolla - June 16, 2017
Shashank Tavildar
Ianeta Hutchinson
Saverio Proto
Stig Telfer
